HIKVISION 4MP ,OUTDOOR, FIXED LENS, DOME CAMERA(120db WDR) "1/3"" Progressive CMOS, ICR, 0lux with IR, 2688×1520: 20fps, 4mm/F2.0 lens (2.8/6mm optional), H.264/MJPEG, dual-stream, IP66, DC12V & PoE, DWDR, 3D DNR, BLC, support on-board storage up to 128GB(SD card not included), 3-axis adjustment, IR range: up to 30m, Vandal-proof housing, Support mobile monitoring via HIK-connect cloud, H.264+ Optimized Codec -S: Audio/Alarm IO -W: Built-in Wi-Fi"
| Product Name | HIKVISION DS-2CD2142WD-IWS 4MP DOME IP CAMERA |
| Product Code | |
| Brand | Hikvision |
| Camera | Image Sensor:1/3" Progressive Scan CMOS |
| Min. Illumination | 0.028 lux @ (f/2.0, AGC on) ,0 Lux with IR |
| Shutter Speed | 1/3 s to 1/100,000 s |
| Lens | 2.8 mm, 4 mm, 6 mm options; angle of view: 106° (2.8 mm), 83° (4 mm), 56° (6 mm) |
| Lens Mount | M12 |
| Day &Night | IR cut filter with auto switch |
| Digital Noise Reduction | 3D DNR |
| Wide Dynamic Range | 120dB |
| Compression Standard | |
| Video Compression | H.264/ MJPEG |
| Video Bit Rate | 32 Kbps – 16Mbps |
| Dual Stream | Yes |
| Image | |
| Max. Resolution | 2688×1520 |
| Frame Rate | 20 @ 2688x1520 30@1920x1080, 1280x720 |
| 3D DNR | Supported |
| Image Settings | Rotate mode, Saturation, rightness, Contrast adjustable by client software or web browser |
| Backlight compensation | Yes, zone optional |
| ROI | Yes |
| Network | |
| Network Storage | NAS(Support NFS,SMB/CIFS) |
| Alarm Trigger | Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Protocols | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QS,IPv6,Bonjour |
| Standard | ONVIF, PSIA, CGI, ISAPI |
| Interface | |
| Audio Input | 1channel (2.0 ~ 2.4Vp-p, 1KOhm) |
| Audio Output | 1 channel (Line level, 600Ohm) |
| Alarm | 1x alarm I/O *only for –S models |
| Communication Interface | 1 RJ45 10M / 100M Ethernet interface |
| On-board storage | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button | Yes |
| Smart Feature-set | |
| Line Crossing Detection | Cross a pre-defined virtual line |
| Intrusion Detection | Enter and loiter in a pre-defined virtual region |
| Wi-Fi Specification (-W) | |
| Wireless Standards | IEEE802.11b, 802.11g, 802.11n |
| Frequency Range | 2.4 GHz ~ 2.4835 GHz |
| Channel Bandwidth | 20/40MHz Support |
| Security | 64/128-bit WEP, PA/WPA2, WPA-PSK/WPA2-PSK, WPS |
| Transmission Rate | 11b: 11Mbps,11g: 54Mbps11n: up to 150Mbps |
| Reception Sensitivity | 11b: -90dBm @ 1Mbps Typical) 11g: -75dBm @ 54Mpbs (Typical) 11n: -74dBm (Typical) |
| Transfer Rates | 11b: 11Mbps, 11g: 54Mbps, 11n: up to 150Mbps |
| Wireless Range | 50m(depend on environment) |
| General | |
| Operating Conditions | -30 °C –60 °C (-22 °F –140 °F) |
| Humidity | 95% or less (non-condensing) |
| Power Supply | 12 V DC ± 10% , PoE (802.3af) |
| Impact ProtectionIK10 | |
| Power Consumption | Max. 5W |
| Ingress Protection level | IP67 |
| IR Range | 30 meters |
| Dimensions | Φ111 × 82 (4.4†× 3.2â€) |
| Weight | 500g |
| NOTE | "-W" series support Wi-Fi (802.11b/g/n) and the modules with Wi-Fi function don’t support the 802.1X protocol. |
